instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*Separate Electric furnace and other system like Electronic scale
-Because Electric furnace temperature is very high
so we need to protect other system.
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*N
Temperature Modulated DSC(TMDSC), High pressure DSC(HPDSC),
Photo DSC(UV-DSC), Maximum resolution TGA or High resolution TGA(MaxRes TGA or HighRes TGA), Reactor TGA, Dynamic Load TMA(DLTMA), Evolved Gas Analysis or Coupling techniques(EGA or TGA-MS/TGA-FTIR)
Difficult to obtain
reproducibility
A few difference of condition
and temperature
→ Enormous effect on result
→ Hard to
1) Steady-state
2) NO Energy generation & Energy storage
이제 Differential element를 고려해 식을 세우면
그리고 미소변화량은
로 나타낼 수 있다. 이제 두식을 연립하여 풀면
와 같이 나온다.
q와 에 대해 Fourier' law와 Newton's cooling law가 성립하므로
이고 이를 대입하면
Differential Method(FDM) 분석에서의 dx, dy size와 동일하므로 따라서 수치해석레포트 manual에 나와 있는 정보를 사용하였다. 실험 매뉴얼의 Fin 제원 정보를 통해서도 확인 가능하다.
온도 실험에 사용한 Fin은 Pure Copper로 이루어진 Thin Rectangular Fin으로써 2차원 형상을 가지고 있다. 이번 실험에서는 Fin의 가열
1. 데이터 분석
1) 수치해석
이번 실험에서 Fin은 2차원 형상인 Thin Rectangular Fin이다. 하지만 두께가 넓이에 비하여 매우 얇고 기부의 열원이 평행하게 작용한다고 가정하면 온도의 분포는 1차원으로 생각할 수 있다. 이 때 2차원 Fin을 1차원을 가정할 수 있는 근거를 FDM을 이용하여 2차원 수치해석으로
analysis에서 정확한 값을 얻을 수 있다. Ink가 건조된 후 TLC를 Air brush를 이용하여 분사하여 준다. Air brush는 공압에 의해서 작동하며 뒤쪽의 나사를 통해서 유량을 조절할 수 있다. TLC를 분사할 때도 Ink와 같은 방법으로 고르게 분사 해준다. 하지만 이 때 주의해야 할 점은 TLC가 발암성 물질이므로 반드시
Differential Method(FDM)
a) 내부에 위치한 node
그림 . 내부에 위치한 node
내부에 위치하므로 네 면에서 모두 conduction이 일어나는데 이때 Temperature profile이 linear하다고 가정하면,이다.
y축 방향에 대해서도 위와 같이 계산하고 값을 대입하면
이다. 가정에서, Grid size는 dx=dy=0.002m이므로 위의 식을
2) 대류 열전달계수(coefficient of convection heat transfer)
매뉴얼에 주어진 h값의 표를 보간하여 이번 실험에서 사용할 대류 열전달계수(coefficient of convection heat transfer) h를 구하도록 하겠다. steady state에서의 온도는 다음과 같이 주어진다.
22.63°
41.3°
26.9°
위의 값들을 이용하여 매뉴얼에 주어진 표
4. Why Chinese market is crucial
China has a large pool of under-served patients, representing the next biggest opportunity for the leading medical device manufacturers. China remains the world’s most populous country in the world and is simultaneously home to a large patient base. China is home to more than 100 million people who are 65 or older which illustrates that it’s a country that